VC Gateway Configuration : Outgoing Lines
  
Outgoing Lines
*To access the VC Gateway Outgoing Lines fields:
1. Navigate to VC Gateway Configuration > Outgoing Lines.
The DME can also initiate a call into a videoconference. When the DME initiates a call to the remote video conferencing system, the VC Gateway is configured using the Outgoing Lines pages.
The Outgoing Lines page shows the line table. This table shows the current state of all available outgoing lines.
 
Field
Description
Page Refresh Interval
Select a refresh interval from the dropdown or Never (not recommended).
Line Name
User-configured line name. Default = OutgoingLine<n>
State
Displays various descriptive messages indicating the current "state" of the line. The first connected line will display as connected; additional connected lines will display as bridged.
Edit
Edit | New. Click to create a new line or to edit an existing line.
Delete
Click and confirm to delete a line.
Line
Call | Hang Up. Click Call to initiate a videoconference with the configured endpoint or Hang Up to end the call.
Record
Click to record the VC Gateway stream on the configured VEMS Mystro server.
Default
Use with care. This button will delete all lines in the table.
*To place an outgoing call to a videoconferencing system:
1. Make sure the Outgoing Line Details (including the Destination Identity) are configured correctly for the selected Line Name.
2. Click the Call button for the selected Line Name on the Outgoing Lines page.
3. Verify the State is "connected" on the Outgoing Lines page.
4. Verify you have audio and video on the videoconferencing monitor or your desktop.
5. If a Live Entered URL is configured in VEMS Mystro, verify the stream is present.