Vbrick Cross Platform Functions : Configure a Vbrick Encoder to Live Stream Video : Create an RTP Stream on the Encoder for Live Streaming
  
Create an RTP Stream on the Encoder for Live Streaming
Next, create an RTP Stream using the configured Encoder video source and rate.
*To access the Streams fields:
1. Navigate to Encoder Configuration > Streams.
A “stream” is a bundled group of resources that describes the characteristics of the output bit stream.
A Stream specifies:
●program
●transport type
●video rate
●audio rate
 
Field
Description
Choose Stream
Select a stream from those defined on the Encoder Configuration > Programs page.
Used By
Read-only. Shows which Transmitters, Servers, and Archivers (future) are configured to use this stream.
Enable Stream
Enable the selected stream.
Stream Name
Enter a user-friendly name for the selected stream.
Transport Type
Use RTP for streaming to a DME and Rev.
Select Video Rate
Select video rate (defined on Encoder Configuration > Video Input page) from dropdown list.
Select Audio Rate
Select audio rate (defined on Encoder Configuration > Audio Input page) from dropdown list.
 
Tip: The fields described below relate to using Vbrick devices with Rev specifically. As a result, not all available fields are covered in their entirety here. For a full description of encoder device setup, view the vbrick encoder Online help.